Load cell project Description Sometimes there are those who ask for help for their own idea. In this case, it stimulated me to experiment with a load cell. As you might imagine it is not really a complete project but only the test with a specific analog-digital converter for reading one […]
Dot clock Description As from an Oriolo20 discussion, forum member, I developed this project, if we want to call it that. In fact it is not really a complete project but only the proof of an experiment that wants to demonstrate a written program. I called it XP which means eXperimental Project…. In fact it is noted that not […]
filtered water with Arduino Description At home we used to drink filtered water. In fact it is found that sometimes cleaning the filter cartridge demonstrates a muddy patina and for this reason there is the preference to filter drinking water. Last year it presented the problem that the flow-through to the filter is so slow […]
With a little’ the time available I thought of putting on a via bluetooth control. The thing is quite simple using those modules available on the market. I took a HC-06, which enables simple communication via serial data. The project is not recent, forgive any lack of inexperience. I also tried […]
This is a simple control via Bluetooth. The thing is quick to implement using those modules available on the market. With a HC-06 and a few components you create an easy control with the data communication via serial. The project is a module that allows control of 2 relays on the board. You can control […]
Description Simple rotation control with the geared motor that has a two-phase encoder mounted on the shaft of the electric motor. During the tests I burned the 16F84A I had and for this I used a 16F628A. The program is still in the memory of a 16F84A, with the special version. I do not judge this project a finished project […]
Inspired by a friend of mine, I have developed a circuit to light a matrix of LEDs. Is it possible that the pastor has requested to repair a votive candle, already provided with the incandescent lights. We made to put the white LEDs in small power. A passage of the coins button or sensor turns on an LED […]
I was asked to help develop a program that controlled the pressure and would record on file. The project is an assembly of some of the Arduino module to demonstrate the proper result of the program, as requested. This description does not purport to be complete project, I would say only a test of a program. […]
This is a simple assembly of some component that I have in the drawers. I got an Arduino UNO r3 and a LCD display with some electronic component, because I need to simulate an encoder. In addition I have written in the program is also a second frequency which oscillates at low frequencies (nell’ order of a few cents). […]