Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #18032
    pawel1010
    Participant

    Hello,

    I’ve built gamma spectrometer with CdWO4 scintillator. The output pulses are 0-2 volts height and 150 µs width at the bottom part. Here is the photo of sample pulse:
    pulse
    How to set parameters to collect correct spectrum? I have a problem with configuring Theremino parameters.

    • This topic was modified 10 months, 1 week ago by pawel1010.
    • This topic was modified 10 months, 1 week ago by pawel1010.
    • This topic was modified 10 months, 1 week ago by pawel1010.
    #18056
    theremino
    Keymaster

    They say it is a “counting” christal, so it will not work to do Gamma Spectrometry.
    so it will not work to do Gamma Spectrometry, so it will not work to do Gamma Spectrometry.

    so it will not work to do Gamma Spectrometry, so it will not work to do Gamma Spectrometry.
    so it will not work to do Gamma Spectrometry.
    so it will not work to do Gamma Spectrometry.

    so it will not work to do Gamma Spectrometry
    Livio

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.