Viewing 8 posts - 1 through 8 (of 10 total)
1 2
  • Author
    Posts
  • 1 March 2021 at 10:09 #10226
    Mino6
    Participant

    I am using Theremino _Buttons successfully,however, the Touch Screen does not work for me as mentioned in the help file.
    Can anyone tell me how it works and what to do to activate it?Thank you.
    Mino6

    1 March 2021 at 11:09 #10228
    theremino
    Keymaster

    But nothing works for you with the touchscreen?
    Don't even press i “Buttons” ?
    Or some particular operations do not work for you, such as moving the sliders or making changes.

    What operating system are you using?
    Probably if you don't use Windows 10 the problem is that.

    2 March 2021 at 9:37 #10245
    Mino6
    Participant

    First of all, thank you for the very quick reply.
    I use windows7 and everything works fine as I wanted, as for the touchscreen that does not work perhaps it is due to my ignorance.
    The touchscreen works on any screen or a suitable one is required for this function?
    Thanks again.

    2 March 2021 at 9:58 #10247
    theremino
    Keymaster

    If I understand correctly you have a computer without a touchscreen, and in that case Buttons cannot work by touching the screen.

    If you have a PC connected to a monitor with a cable, then that monitor has no touch screen (except very rare and very expensive cases).

    The touch-screen function is performed by a layer of transparent touch-sensitive wires that is inserted into the front glass of the displays. Not all screens have this layer. Normally only notebook ones have it, of tablets and phones (but Buttons doesn't work on phones).

    2 March 2021 at 10:01 #10249
    Mino6
    Participant

    Thanks so much for the complete explanation.

    20 June 2021 at 10:04 #10479
    Mino6
    Participant

    I'd still like a little help,I am using Theramino_Buttons successfully but I wish I could also have Theramino_HAL open automatically when I open the Buttons.
    In order to do this, you have to add?
    Thank you

    20 June 2021 at 17:57 #10481
    theremino
    Keymaster

    Ciao,
    first of all you have to make a parent folder that contains both the Theremino Buttons folder and that of Theremino HAL
    and you could call this parent folder by the name of your project (or whichever way you prefer)

    Then in this folder put an application Theremino_StartALL that will open all the executables thereminici (others will also be added)
    And then when you close the Theremino_StartALL application, she will also take care of closing all other applications she had open.

    The Theremino_StartALL application is downloaded with this
    CONNECTION

    Finally on the desktop you will put a shortcut to the Theremino_StartALL.exe application only

    ——

    If you can't call me at 0125 57290 and I'll help you fix everything.
    Ciao
    Livio

    21 June 2021 at 16:56 #10483
    Mino6
    Participant

    Many thanks,everything works perfectly.
    I apologize if every now and then I show up with a little disturbance.
    A big thank you again for your availability

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 10 total)
1 2
  • You must be logged in to reply to this topic.